Bryant start--up operating and service and Manuel d'instructions télécharger pdf (Page 15)

If alternate vent position

is required, loosen clamp

on vent elbow inlet.

Remove trap from

collector box.

Remove pressure switch tube

from port on collector box.

Remove relief tube

from relief port on

condensate trap.

Remove middle and right

plug from collector box.

Remove relief tube

from port on collector

box.

Rotate elbow to

desired position and

torque clamp on inlet

15 lb.-in.

Slide relief tube in

stand-offs to adjust

length.

Attach condensate

trap to collector box

with screw.

Align trap over middle

and right-hand port on

collector box.

Install plugs in open

ports on collector box.

Connect relief tube to

port on collector box.

Trim excess tube.

Route pressure switch tube

underneath relief tube and

connect to port on collector box.

Connect relief tube to

relief port on condensate

trap.

Unconverted Factory Trap Configuration

As Viewed in the Horizontal Left Orientation

Horizontal Left Trap Configuration

A11279

Fig. 10 -- Horizontal Left Configuration

(Appearance May Vary)

987MA

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 85 86

Commentaires sur ces manuels

Pas de commentaire

Bryant start--up operating and service and Manuel d'instructions Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Pompes à chaleur Bryant start--up operating and service and