Bryant operating and service and main Manuel d'instructions télécharger pdf (Page 31)

ADVANCED SETUP 28

Cooling Humidity

1 Flip down the door near the base of the Evolution

™

Control.

2 Press the ADVANCED setup button.

3 Press the LEFT button three times to view the COOLING

HUMIDITY screen (4 of 5).

4 Use the TEMP (+\-) button to set your desired humidity level.

5 To exit, press ADVANCED or simply close the door.

- OR -

6 If you want to change the way cooling dehumidification is

controlled, scroll to DEHUMIDIFY. You will have two options.

OFF – The system will not activate the cooling equipment to

dehumidify if the cooling temperature has been satisfied.

ON – The system dehumidifies by activating the cooling

equipment – even after the cooling temperature has been

satisfied.

Your air conditioning system will provide excellent

humidification control with DEHUMIDIFY set to either ON or OFF.

However, you will receive better humidification control with

the ON setting.

7 Use the TEMP (+\-) button to make your selection.

8 To exit, press ADVANCED or simply close the door.

NOTE: You can exit Advanced Setup at any time. When exiting,

you will be prompted to save changes if you have made any.

Select “YES” to save your changes, “NO” to revert back to previ-

ous settings.

1 2 ... 26 27 28 29 30 31 32 33 34 35

Pas de commentaire

Bryant operating and service and main Manuel d'instructions Page 31